Concerned about Cybersecurity and Privacy? Deleting Data from Alexa, Echo, Smart Home/IoT Devices Isn’t Easy

By B.N. Frank

Privacy and security experts have been warning for many years about risks associated with all Internet of Things (IoT), “Smart”, and wireless devices and infrastructure (see 1, 2, 3, 4).  Warnings have been issued specifically for “home assistants” and security devices from Amazon, Google, and other companies as well (see 1, 2, 3, 4, 5, 6).  For those who want to dispose of these devices, it’s important to learn how to properly delete all data they have collected while operating in your home.

More from Ars Technica:


Thinking about selling your Echo Dot—or any IoT device? Read this first

Deleting data from Echo Dots—and other IoT devices from Amazon and elsewhere—is hard.

Like most Internet-of-things (IoT) devices these days, Amazon’s Echo Dot gives users a way to perform a factory reset so, as the corporate behemoth says, users can “remove any… personal content from the applicable device(s)” before selling or discarding them. But researchers have recently found that the digital bits that remain on these reset devices can be reassembled to retrieve a wealth of sensitive data, including passwords, locations, authentication tokens, and other sensitive data.

Most IoT devices, the Echo Dot included, use NAND-based flash memory to store data. Like traditional hard drives, NAND—which is short for the boolean operator “NOT AND“—stores bits of data so they can be recalled later, but whereas hard drives write data to magnetic platters, NAND uses silicon chips. NAND is also less stable than hard drives because reading and writing to it produces bit errors that must be corrected using error-correcting code.

Reset but not wiped

NAND is usually organized in planes, blocks, and pages. This design allows for a limited number of erase cycles, usually in the neighborhood of between 10,000 to 100,000 times per block. To extend the life of the chip, blocks storing deleted data are often invalidated rather than wiped. True deletions usually happen only when most of the pages in a block are invalidated. This process is known as wear-leveling.

Researchers from Northeastern University bought 86 used devices on eBay and at flea markets over a span of 16 months. They first examined the purchased devices to see which ones had been factory reset and which hadn’t. Their first surprise: 61 percent of them had not been reset. Without a reset, recovering the previous owners’ Wi-Fi passwords, router MAC addresses, Amazon account credentials, and information about connected devices was a relatively easy process.

The next surprise came when the researchers disassembled the devices and forensically examined the contents stored in their memory.

“An adversary with physical access to such devices (e.g., purchasing a used one) can retrieve sensitive information such as Wi-Fi credentials, the physical location of (previous) owners, and cyber-physical devices (e.g., cameras, door locks),” the researchers wrote in a research paper. “We show that such information, including all previous passwords and tokens, remains on the flash memory, even after a factory reset.”

Used Echo Dots and other Amazon devices can come in a variety of states. One state is the device remains provisioned, as the 61 percent of purchased Echo Dots were. The devices can be reset while they are connected to the previous owner’s Wi-Fi network, reset while disconnected from Wi-Fi, either with or without deleting the device from the owner’s Alexa app.

Depending on the type of NAND flash and the state of the previously owned device, the researchers used several different techniques to extract the stored data. For reset devices, there’s a process known as chip-off, which involves disassembling the device and desoldering the flash memory. The researchers then use an external device to access and extract the flash contents. This method requires a fair amount of equipment, skill, and time.

A different process called in-system programming allows the researchers to access the flash without desoldering it. It works by scratching some of the solder mask coating off of the printed circuit board and attaching a conductive needle to an exposed piece of copper to tap into the signal trace, which connects the flash to the CPU.

The researchers also created a hybrid chip-off method that causes less damage and thermal stress to the PCB and the embedded multi chip package. These defects can cause short-circuiting and breakage of PCB pads. The hybrid technique uses a donor multi-chip package for the RAM and the embedded multi media card portion of the original multi-chip package externally. This method is mostly interesting to researchers who want to analyze IoT devices.

Alexa, who am I?…

Read full article


Another disadvantage to Alexa, Echo and other wireless devices – they emit biologically harmful Bluetooth and WiFi. Research has indicated that exposure increases our risk of developing cancer and various additional undesirable health issues.  American Academy of Pediatrics and other medical experts have warned that children are more vulnerable to exposure.  Got pets?  They can be harmed by it too.



Activist Post reports regularly about unsafe technology.  For more information visit our archives and the following links:

Image: Waking Times

Become a Patron!
Or support us at SubscribeStar
Donate cryptocurrency HERE

Subscribe to Activist Post for truth, peace, and freedom news. Follow us on Telegram, SoMee, HIVE, Flote, Minds, MeWe, Twitter, Gab, Ruqqus and What Really Happened.

Provide, Protect and Profit from what’s coming! Get a free issue of Counter Markets today.


Activist Post Daily Newsletter

Subscription is FREE and CONFIDENTIAL
Free Report: How To Survive The Job Automation Apocalypse with subscription

Be the first to comment on "Concerned about Cybersecurity and Privacy? Deleting Data from Alexa, Echo, Smart Home/IoT Devices Isn’t Easy"

Leave a comment

Your email address will not be published.


*